Search results for "*" | Collection of Cooper Hewitt, Smithsonian Design Museum

Search Results

Low rectilinear form, the seat/arms and rectangular back upholstered in yellow-green; form trimmed with strip of khaki green vinyl welting running horizontally through center; removeable rectangular seat cushion upholstered in orange and pink striped woven textile; cast tubular aluminum posts support back; four short splayed cast tubular aluminum legs with circular pad feet.

Braniff Airways Model 66310 Armchair, ca. 1968
woven textile upholstery of cotton (46%), wool (33%), and nylon (21%), with....
Gift of George R. Kravis II in honor of Caroline Baumann.
2013-37-1

This object was made by Herman Miller Furniture Company.
This object is part of the Product Design and Decorative Arts collection.
There are 3 images of this object.

Wide, diamond-shaped form with deep seat, covered in dark gray wool; back of chair a chromed steel grid on geometric base composed of bent steel frame forming vertical and horizontal supports and runners.

Diamond Chair, 1952
chrome-plated tubular steel, woven wool upholstery.
Gift of Knoll International.
1990-139-6

This object is part of the Product Design and Decorative Arts collection.
There are 4 images of this object.

Blue rectilinear form composed of rectangular drawer and shelf unit on left, two-shelf unit on right, supporting two horizontal drawers immediately below desk top; drawer and shelf units with chromed metal supports, square in section; drawers with red conical knobs; desk top covered in blue-painted canvas.

Desk (USA), ca. 1933
lacquered wood, painted canvas, chromed metal.
Gift of Joel and Anne Ehrenkranz.
2006-24-1

This object was made by Frankl Galleries.
This object is part of the Product Design and Decorative Arts collection.
There are 7 images of this object.

Dressing Table And Bench (USA)

Dressing Table And Bench (USA)
lacquered joined wood, mirrored glass, metal.
1969-97-7-a/i

This object is part of the Product Design and Decorative Arts collection.
There are 4 images of this object.

A four-legged rectangular table made in mahogany with brass handles. This table folds out into a small ladder.

Metamorphic library table-steps Metamorphic Library Table-steps, ca. 1795
mahogany, brass, felt.
Gift of Anonymous Donor.
1967-45-28

This object is part of the Product Design and Decorative Arts collection.
There are 4 images of this object.

Cast aluminum frame with four legs, with open strut support system. Frame coated with epoxy paint. Base of walnut with webbed support. Struts continue from legs up back of sofa to support two shaped walnut horizontal elements. Seat and back upholstered in leather with rectangular paneled cushions. Two rectangular horizontal arms with similar cushions.

ES 108 Sofa, 1984
aluminum, walnut, leather, epoxy, urethane foam, polyster fiber.
Gift of Herman Miller, Inc..
1985-98-1

This object was made by Herman Miller Furniture Company.
This object is part of the Product Design and Decorative Arts collection.
There are 2 images of this object.

Base consisting of a continuous, ribbon-like curved mass of layered corrogated cardboard topped by a separate horizontal corrogated cardboard sheet acting as a cushion.

Bubbles Chaise Longue, ca. 1988
layered and bent corrugated cardboard.
Museum purchase from the Members' Acquisitions Fund of Cooper-Hewitt,....
2012-3-1

This object is part of the Product Design and Decorative Arts collection.
There are 3 images of this object.

Frame with outward scroll arms with open lyre-form splats mounted sideways; gilt-wood winged paw feet. Upholstery replaced, 2011.

Settee (USA), 1815–20
mahogany, mahogany veneer on cherry, gilding, paint, gilt metal (mounts);....
Gift of Mrs. John Innes Kane.
1920-19-85-a/d

This object is part of the Product Design and Decorative Arts collection.
There are 4 images of this object.

Long, veneered rectangular form with rounded front corners; brass rail attached to top rear; central section with four hinged doors, each with brass knob; drawers inside; narrow vertical strip of plain brass attached at center; open shelves at sides. Base with four square reeded feet.

Sideboard (USA), 1929–1930
imbuia wood (brazillian walnut), macassar ebony, maple, monel metal, brass.
Gift of Alan and Leo Dworsky in memory of Ruth and Moses Dworsky.
1987-31-1-a/l

This object was made by Schmieg, Hungate & Kotzian, Inc..
This object is part of the Product Design and Decorative Arts collection.
There are 6 images of this object.

Ebonized beech bench with turned back sections, supports, and legs. Rush seat set into frame.

Sussex Settee, late 19th century
ebonized wood, rush.
Gift of Arthur Sanderson & Sons, Ltd..
2004-29-1

This object is part of the Product Design and Decorative Arts collection.
There are 4 images of this object.

Off-road wheelchair

Wheelchair, Leveraged Freedom Chair: LFC3, 2013
mild steel and bicycle components.
Courtesy of the designers.
s-e-1612

This object was made by Pinnacle Industries.
There are 3 images and 1 video of this object.

Video, Leveraged Freedom Chair (LFC): Video, 2013

Video, Leveraged Freedom Chair (LFC): Video, 2013
2:19 minutes.
Courtesy of GRIT.
s-e-1637

This object was made by Pinnacle Industries and Global Research Innovation and Technology (GRIT).
There are 2 images and 1 video of this object.

Prototype, off-road wheelchair

Wheelchair, Leveraged Freedom Chair (LFC) Prime Prototype, 2013
aluminum and 3d-printed plastic.
Purchase from manufacturer.
3.2013.1

This object was made by Continuum LLC.
There are 4 images and 2 videos of this object.

Chaise (USA), 1860–70
rosewood veneer, oak (frame), velvet upholstery.
Gift of Mrs. Edwin Gould.
1937-4-1

This object is part of the Product Design and Decorative Arts collection.
There are 4 images of this object.

Constructed of stack-laminated wood planks, carved and worked into a smooth body of organic form, bulbous on sides and curving in at center (roughly peanut-shaped); bisected along horizontal axis where lid, hinged at back, meets bottom of chest; bottom flows into base formed as tapering cylinder with domed foot; the lid with three up-curved projections at top center (central projection serves as grip to raise lid). Interior fitted with removable wooden housing for two stereo components: turntable on left, stereo/radio receiver on right; inset pierced with rows of circular holes in front of and behind receiver; black leather strap in center, one end attached to cavity of lid, the other attached to stereo housing.

Chest For Stereo (USA), 1973
stack-laminated and carved walnut, metal, leather, stereo components.
Gift of Linda and Irwin R. Berman.
2005-9-1-a/e

This object is part of the Product Design and Decorative Arts collection.
There are 5 images of this object.

Object ID #18344893
rosewood, maple, glass mirror, brass.
Gift of Anonymous Donor.
1937-45-6

This object is part of the Product Design and Decorative Arts collection.
There are 2 images of this object.

Cabinet on stand with floral marquetry veneer. Cabinet fronted by two large doors with brass lock plates that open to reveal twelve small interior drawers, each with brass pull, and one cupboard door with brass lock plate, all veneered with floral marquetry. Long narrow drawer in cornice molding on top. Stand has long narrow drawer with two brass pulls and one lock plate, supported by six scrolled legs with curved stretchers and bun feet with metal casters.

Cabinet On Stand (probably England), 1675–1700
marquetry inlaid, veneered and joined oak, deal, walnut, and other wood,....
Bequest of Mrs. John Innes Kane.
1926-22-43

This object is part of the Product Design and Decorative Arts collection.
There are 19 images of this object.